How to classify the products of plastic mold factory
Plastic molds can be divided into three types according to the different types of casting systems
1. Hot runner mold: The structure of this type of mold is roughly the same as that of the nozzle. The big difference is that the runner is in one or more hot runner plates and hot nozzles with constant temperature. There is no cold material demoulding, runner and pouring. The port is directly on the product, so the runner does not need to be demolded. This system is also called a nozzleless system, which can save raw materials and is suitable for situations where raw materials are more expensive and products require higher requirements. Design and processing are difficult, and mold costs are higher.
2. Large nozzle mold: The runner and gate are on the parting line, and they are demolded together with the product when the mold is opened. The design is quite simple, easy to process, and low cost, so more people use the large nozzle system to work.
3. Fine nozzle mold: runners and gates are not on the parting line, generally directly on the product, so it is necessary to design an additional set of nozzle parting lines, the design is more complicated, and the processing is more difficult. Generally, the thinner should be selected according to the product requirements. Nozzle system, etc.
contacts :Mr. Lang
cell phone:13798388299
Telephone:0755-27358387
website :http://hdwysj.mycn86.cn/
Address :Building D, No. 590 Jinbi Road, biling village, Pingshan New District, Shenzhen